peugeot car key replacement 308 Key Fob Problems and How to Fix Them
If your
peugeot car key 308 key fob stopped working one day, it could be due to a dead battery in the coin or water damage or receiver module issues, or a malfunctioning electronic chip. These are all simple solutions that will get your car back to speed in no time!
The key blade may become worn-out and cause an issue with your car key. It is easy to fix this problem by visiting your local Car Key Man Auto Locksmith to replace the blade.
Battery
The battery of the key fob in your Peugeot 308 can sometimes die or become too weak to send a strong signal to the car. This can cause the key fob to cease working and prevent you from opening and locking the doors, or even starting your engine. You'll need a new battery on the key fob in order to fix this.
You can purchase a new battery at an auto parts store, or at your local hardware store. Make sure the battery is brand new and has not sat on the counter for too long. A new battery will have greater capacity and be able to transmit a stronger signal to the car.
After replacing the battery try unlocking the doors and locking them with the key fob. If the doors do not unlock, the problem is likely with the car's receiver module which can be changed by your local Peugeot dealer.
It's possible that the key fob's internal chip has been damaged. You could cause damage to your key fob when you drop it on the ground or expose it to water. Rubber seals that shield your chip from moisture might get worn out over time. This is especially the case when you expose your key fob to water for prolonged periods of time, like submerging it at the beach in the ocean. To prevent this from happening, it's essential to keep your key fob away from moisture and to never let it come in contact with water.
Water Damage
Don't lose hope on your key fob when it gets wet, no matter if you dropped it in the pool or
Peugeot 308 Key Fob stumbled into a pool. While the key fob has rubber seals to protect it from water, prolonged exposure to water may cause damage to its electronic chip. Because water is an excellent conductor and conductor, any water that is able to get inside the key fob may cause a chain of short circuits which will eventually ruin the chip. After removing the batteries, clean the contacts with isopropyl and dry them completely before putting them back in.
A dead battery can also be the reason that your Peugeot 308 won't start. Jumper cables can be a great method of restarting the engine when you have an additional car. If the battery is damaged the battery must be replaced.
Another possibility is an ineffective receiver in the vehicle, which can prevent it from receiving a signal from the key fob. The key fob may be damaged, or there could be a problem with the antenna, wiring or the key fob itself. If you have the latest key fob, it could need to be programmed for the vehicle. If you are unable solve the issue, contact an expert technician. A trained technician in the field will be able to determine the issue quickly and resolve it quickly.
Radio Interference
Interference can cause problems such as a key fob that isn't recognized or has a limited range. The interference could be transmitted or radiated, the latter resulting from power and speaker cables that are too close to electrical parts. Generally, re-routing the cables or moving them further away from the components may solve the issue.
It's unlikely someone is watching the key fob's signal in attempt to steal your vehicle, but it's possible that radio frequency interference has drowned out the signal. This is a simple problem to fix.
If your key fob isn't being recognized by the system, try replacing the battery. Also, make sure that the battery is of the proper size and type. Incorrectly sized batteries can damage the fob.
These devices can interfere with the key signal if they use the same radio frequency. It is recommended not using these devices with your key fob.
Pairing Issues
The remote keyless entry system contains a receiver that receives radio frequency signals from the key fob. If this receiver has developed issues, you will not be in a position to begin your vehicle even if the key fob is functional and can be modified. The issue can be caused by a number of factors, including an inoperative coin battery or water damage. The receiver may be malfunctioning because of an internal or software issue or damage to the key itself.
One of the main reasons for why your
Peugeot 308 key fob doesn't work is that the battery inside has gone out of service. This battery can be easily replaced, but ensure that it's the proper battery for your keyfob. Using an incorrect battery could cause further issues with the key fob, so it's best to use the original or an alternative that is similar in size, voltage, and
Peugeot 308 Key Fob specification.
Your Peugeot 308 keyfob may not work if it has been paired with an unrelated vehicle. This can happen if have given your key fob to someone else or in the event that the key was used to unlock and start other vehicles. This can be fixed by reprogramming your key fob using an OBDII scan. This tool will ask for information about your car, for example, its VIN or engine type. It is crucial to enter the correct information.
