How to Replace a UPVC Window Handle
If the window handle of your upvc is damaged, don't be concerned. Replacing a window handle made from upvc is an easy task and can be completed in a matter of a few steps.
If you are using a cranked or an in-line espagnolette window handle, they all come with a square spindle bar that protrudes from the back plate and is inserted into the locking mechanism.
Identify the lock type and handle
Over time window handles or locks may become damaged and lose their function. It is possible to fix this problem without replacing the entire uPVC unit. One of the first things you need to do is to determine the kind of handle and lock you have because this will help determine what replacement parts you will need.
You can determine the type of handle by looking at the base. There is a screw or pin holding the handle to its base. If the screw is gone, it could indicate that the handle has separated from the base. If the handle has been split in the middle and is no longer able to grip the spindle, this could also mean that it needs replacement.
There are a variety of uPVC handles however the Espag handle is the most common. They are usually secured by two bolts and feature an articulating spindle that is connected to the lock mechanism within the frame of the window. These handles are usually used on tilt and turn uPVC windows.
Another kind of uPVC window handle is the Cockspur handle. Similar to the Espag handle, however they are a little further from the frame. These handles are typically used on older uPVC window frames.
Venetian window handles are a different alternative. They are similar to Espag handles but have a flat bottom that allows them to be positioned flush with the frame. They are an excellent choice for homeowners who are looking for an elegant and stylish handle that blends with their uPVC window frames. They are available in a range of colors that will match any style.
Measure the spindle
It's important to be aware of how the handle fixed before you purchase an replacement. This will tell you how it is tight or loose and if it can be able to fit into the window frame. You can do this by identifying the type of handle you own and measuring the length of the spindle. The spindle is a steel shaft that connects your handle to the lock inside the window frame. The spindle comes in a variety of sizes. The current industry standard is 8mm. Older handles could have a 9mm cross-section so it's crucial to measure the old one to make sure you get the proper size replacement.
There are several types of window handles, but the most commonly used are inline Espagnolette and cockspur handles. These handles are operated by with a locking mechanism inside the window, using shootbolt rods which secure the window when it's closed. Depending on the type of handle, they are held in place by pins or screws.
You can purchase replacement upvc handles online or in most DIY stores. They are available in a variety of finishes and are suitable for new or replacement windows. They can also be key-locking or non-locking to provide additional security.
To remove the handle open the window and remove the screws which hold it in place. Be careful not to damage the screws, and keep them safe in a container to be stored for future use. Once the screws are removed, carefully remove the handle. Find the distance from the base of the spindle up to the top. This will provide you with the necessary information to purchase the correct replacement. The spindle of the handle is the iron shaft connecting it to the lock gearbox in the window frame.
Take off the handle from the old one.
Switching a uPVC handle is a straightforward job that takes less than five minutes if you have the proper tools. The first thing to determine is the type and size of the handle or lock. This will help you choose the right replacement. After that, measuring the spindle will ensure that the new handle is a suitable fit. The old handle needs to be removed and replaced with the new one.
The majority of uPVC handles have inline Espagnolette handles. These handles feature a central spindle which slots into the locking mechanism of the window. They are usually easy to remove, but you may require force to remove them if they're stuck. There are usually two screws that hold the handle in place which can be removed with the help of pliers or
window Handles replacement a screwdriver. It is also possible to remove pins, based on the kind of handle.
After the screws have been removed After that, you can take off the handle. The top of the base plate will be visible once the handle is in the open position, showing two screws that you can unscrew. If the sticker remains on,
replace upvc window handle you will need to take it off.
Using the screws from the handle, you are now able to put the new handle in the appropriate position. Make sure that the screw holes are aligned on the window to the holes in the handle. After you've done this then you can replace the screw caps and test the new handle to ensure that it works correctly. It's easy to change the uPVC, however you must do it right.
Fit the new handle
If you've managed to successfully remove the handle that you have on the frame, now is the time to install the new handle. Begin by locating and taking off the screw covers with your screwdriver. After they've been removed, put them in a secure place and proceed to the next step.
Then screw the spindle in by aligning it with the hole. Be sure to align the holes of the handle with holes in the window frame. Also, use a screw identical to those used previously or it could result in the handle not being secure.
The uPVC Espag handle comes equipped with a spindle of 7mm square which turns the lock mechanism on the window. This type of handle is utilized in most modern uPVC Windows. uPVC Cockspur handles (also known as Cotswold handles) feature a long nose that locks over the frame's outer edge or transom bar cross member. They are typically found in older windows made of uPVC.
Once the new handle has been put in place, it's important to test that it works properly by locking and unlocking the window a few times. If all goes according to plan, the new uPVC handle should be properly attached and running smoothly. If not, the steps above will help you identify any problems and get it fixed quickly. Bridgewater Glass can help you in the event of problems with your uPVC handles or other glazed home improvements. Our glaziers can repair or replace various window frames and handles. This makes us a great choice for double glazing.
Test the new handle
As time passes and through regular use the uPVC locks and handles may be damaged and wear and wear and. This can leave them less secure and efficient which is why it's crucial to
Replace Upvc Window Handle them as quickly as you can. This is also a good option to consider when you upgrade your windows. Switching the handle and locking mechanism will help maintain your new windows' integrity.
There are a variety of uPVC window handles. Some are fixed by pins or screws, while others feature blades that fit into the lock mechanism. Each type has a different method of replacing it, and you'll need to know which type you own.
The most popular kind of window handle is the espag. They are typically used on newer uPVC Windows. These handles have a spindle that extends from the handle to the lock gearbox and when you open the window it activates the locking mechanism. These handles are also easy to remove. However, you should be cautious not to damage either the mechanism or handle.
Cockspur handles are another option for uPVC window handles. They're fixed by a spur that is snagged onto an elongated striker plate that is attached to the frame. When you close or tilt the window, it engages the locking mechanism.