upvc window handle replacement (
http://www.healthndream.com/gnuboard5/bbs/board.php?bo_table=qna_heartsine&wr_id=442416)
Replacing a broken window handle is a easy task and with the right tools it can be done quickly. It is essential to know what kind of handle you have and its spindle size before purchasing the replacement.
Older uPVC window handles have a spur that extends and is locked over the wedge striker. These can be left- or right-handed and should be compatible when replaced.
What type of lock and handle do I have?
There are a variety of windows locks and handles made of upvc each with their own advantages and purposes. The type of handle you have will determine whether or not the locking mechanism you have is effective and if it is easy to open windows. Over time, and with regular use the upvc handles that are on your windows may get worn out and damaged. This makes them less secure and effective. In some instances they could even disappear completely. It is important to repair the handles on your window made of upvc as soon as you begin to notice they are falling off. This will prevent potential break-ins and keep your home safe.
The good news is that replacing your window handles made of upvc is a relatively simple task that can be completed by nearly everyone. You'll require some basic tools, but with appropriate knowledge, it's a straightforward process that should take only a couple of minutes. To get started you must identify the type of handle and lock you have on your window made of upvc, which will help you to find the ideal replacement.
Inline Espagnolette Handles
They are the most popular type of upvc handle and are usually placed on the side of your window. They have a flat design and come with a latch that engages with the locking mechanism on the window frame when turned. Inline upvc handles feature a spindle running through the middle of the handle into the window frame in order to operate the latch.
Cockspur Handles
They are typically found on older uPVC window frames and feature a distinctive, hook-shaped design. Cockspur handles are secured to the frame of the window with only one screw and
UPVC Window Handle Replacement are less secure than other kinds of window handle.
Handles that turn and tilt
The tilt and turn handles differ from other handles made of upvc in that they can be rotated to open the window and then lowered into the window to ventilate. They feature a 7mm spindle in the back and are available both in left and right-handed versions.
When you are purchasing replacement handles for upvc it is essential to check the spindle length because not all handles are the same size. Drop something in the middle of the hole to check the length. This is the maximum size of spindle that will fit into your windows.
What is the spindle?
uPVC window handles operate similarly like doors, turning the handle to activate an internal latch within the frame. The window then opens and closed. The handles could be damaged, especially if often used or are subjected to harsh conditions. This can lead to the need to replace your uPVC windows handles as they might not operate the window properly for a long time.
There are many types of uPVC handle options, including Espag, Cockspur, and Spaded handles. They are designed to fit in the uPVC frames in different ways and each handle type utilizes a specific spindle to lock the mechanism to the window. It is essential to determine the type of handle you have installed on your uPVC windows so that you can
replace window glass near me it with the correct one.
You can find out what kind of uPVC handle you have by looking at the base section of your handle. A snap-in cover is over the screw that holds the base of the handle in place. Remove this and then you should be able to see the second screw at the opposite end of the base portion of the handle. After both screws have been removed, you should be able take the handle out of the uPVC.
After you have removed the uPVC window handle, you will need to remove the spindle that was previously attached to the locking mechanism. Note the length of the spindle. You'll need to purchase a new one that is the same length as the original handle and locking device.
The spindle wears out and cannot operate the locking mechanism. This could be due to corrosion, damage due to continuous use, or even an unreliable locking mechanism. If this happens, it is required to replace the window handle and locking mechanism to restore complete functionality to your uPVC windows.
How do I get rid of the handle from the previous one?
Window handles can be damaged or broken over time. It is crucial to repair them as quickly as you can to ensure your safety. It is easy to replace a worn or damaged handle. The job can be completed in under an hour without the need of special tools.
To take off the handle, you first need to remove the screw at the bottom of the handle. After this screw is removed, the handle will be pulled away from the base. There is a second screw that is located at the bottom of the handle's base and it can be removed as well. When both screws are removed, the handle can be removed completely from the base section of the window.
After removing the old handle and align the fixing holes of the new handle with the existing holes in the window frame. There may be a little cap or sticker on the new handle, so remove them if needed and then screw the handle in its place. It is important to check whether the handle functions after it has been installed. Turn the handle over and make sure the lock mechanism is working.
Espag handles come with an extra spindle that is protruding from the handle and slots into a multipoint locking mechanism in the window frame. Cadenza windows come with a blade with cutouts which fit into the lock mechanism. Cockspur handles are long and hook over the frame that surrounds the window or the transom bar crossmember.
Once you have the new handle in place, slide the spindle inside the window lock and then tighten it down. Once the handle is securely fixed then replace the snap-in cover and screw cap (if appropriate). Once the handle is ready to use, you can open and close the window a couple of times to ensure it works properly and securely.
How do I fit the new handle?
It's not difficult to change the handle on your windows made of uPVC. The process is very simple. All you require is a screwdriver, and a small amount of patience. First, make sure that the handle that you are replacing is unlocked. Then remove any screws that are visible. You could also replace them with screw caps. After removing the handle and you are ready to take an note of the length of the spindle that protrudes from the back of the handle. This is crucial as it will determine the type of handle you'll require to purchase.
Espagnolette handles on uPVC are the most popular type of handle. They feature a spindle that runs through the handle and operates a locking mechanism within the
window glass replacement frame. Once the handle is turned it opens the latch on the window, allowing it to open. With time and regular use, espagnolette handles may become damaged or impaired and it is necessary to locate replacements.
Cadenza handles are a type of uPVC handle that is usually used in tilt and turn windows. They have a protruding knife that is operated by a multi-point locking mechanism inside the window. They are generally more secure than handles made of espagnolette because they are only accessible from the inside. They can be replaced with the same procedure as espagnolette handles but you will need to ensure that the new handle has a curved blade instead of flat ones.
Once you have determined the right handle to purchase then you can line up the new handle to the existing screw holes, and then screw it into place. You should then put the screw covers back on and verify that the new handle functions properly.