Fiat 500 Key Fob Replacement
If your 500 keyfob stops working, use another one to see if it can be detected by the car. If it does, then the issue is likely with the original fob's battery or water damage.
First, replace the battery. The "+" side should be facing down.
Dead Battery
The battery is often the reason behind an inoperative fob. This is a simple fix and the majority of fobs will notify you that the battery is dying. You can find the instructions for most car fobs on YouTube or in your owner's guide. You can also take it to a local locksmith or the dealer that sold it to you to replace it.
Sometimes a fob will stop working due to a problem with the internal circuit board. This isn't very common but it can happen. The internal chip may be damaged if you drop the fob over something that is hard. It can be a problem if you have an aftermarket fob and the key doesn't work. In this case you'll be required to go to an expert locksmith or dealer and have it reconfigured to work with your 500.
One 2012
Fiat 500 keys 500 Flip Key Remote - resembles Ilco brand with lock, unlock and trunk buttons. New replacement keyless entry remote (will need to be cut and programmed by a locksmith)
Chips that are damaged
A key fob with the fiat 500 number is a wireless device that provides the signal needed for the car to start when you press the button. It is equipped with a microchip that contains the code that is needed to communicate with the car. If the chip is damaged, it will not transmit the correct code and the car won't start. A locksmith can fix this type of damage. United Locksmith can complete this service on both classic as well as newer models, so don't be afraid to contact us.
You can purchase a new fob and have it professionally programmed by a locksmith. This is much less expensive than going to the dealer and will function exactly the same way. A locksmith will require specific information from you, including the year that your car was built and the name of its model.
If you are not sure of the best solution to this issue try using the help of a US dollar bill. The copper on the bill is abrasive enough to take away oxidation and dirt however, it won't cause harm to the microchip. If the chip is physically damaged, it might not be in a position to be repaired. This could happen if you drop the chip or run it over by your vehicle.
Water Damage
Whether you accidentally dropped your keys in the pool, left them in your bag while swimming at the beach or splashed them with water on a rainy day it's likely your key fob is likely to suffer water damage. Even if it's just an ounce of water on the key, it could cause serious problems with its electronic components.
The good news is that you can often solve this issue by taking off the fob's key and
Fiat 500 Keys then using paper towels to rid it of any remaining dirt or water. Once the fob is dry it is possible to replace its battery. It will then begin functioning normally.
You can take it to an auto repair shop or locksmith to have it professionally cleaned and programmed. These experts can make use of special equipment to make sure that the key fob works with the computer in your car.
If your
fiat punto key fob 500's keys fob stops working, it can be frustrating and stressful. It can be expensive and inconvenient to take your key fob to the dealer. A locksmith can handle every aspect of your car's key fob replacement without the necessity of a dealer visit. This is why they are a far better choice than the dealership.
Pairing Issues
If you accidentally drop your keyfob, or it stops functioning and nothing else seems to be wrong, it could be the chip. This could be due water damage or a dead battery. it may be due to a need to reprogramme.
This is often done by following the directions in your owner's guide. However it's recommended to have a locksmith from your automotive perform this procedure if you're having trouble or the instructions in your manual don't work for you. This will ensure that the chip is not damaged, and is the least expensive alternative.
Another problem with some 500 owners is that the key fob can't lock the car. This could be a problem when you need to refill at an gas station. Some owners have reported that their 500's locking system failed and they had to replace the entire intermediate steering shaft.
fiat 500x key fob programming has actually mentioned this problem in a technical bulletin (TSB).
A reputable locksmith is able to assist you if your Fiat is having problems. They're able to duplicate your existing key or make you new keys that lock and open the car. They can do this without ever seeing your old key and are usually much cheaper than getting it from the dealership.