White ink heat transfer has a wide associated with uses, and the technology and effects are constantly being updated. What remains unchanged is once the heat transfer film is hot stamped for the substrate, the film must be peeled off to complete the entire hot stamping process. However, some heat transfer films need with regard to hot-teared, even though some need to get cold-teared. Many customers will ask why it is vital? Which membrane is most effective?
Today, I will take in order to have an in-depth understanding of the magic heat dvd movie.
Hot-peel film
The main release component hot tear film is wax, which has poor ink absorption performance and small letters basic to to fall off, however the surface becomes brighter software package . is completely cooled.
After the hot stamping is transferred to your fabric the actual ironing machine, it is torn off while it is hot, saving waiting times.
Tear them back within 9 seconds after turning more than a press (ambient temperature 35°C), or tear it off when the film surface temperature is greater than 100°C.
If not peeled off in time, the cooling glue will stick to the clothes, creating the clothes and film to tear at bay. There may be problems such as pattern residue.
Cold peel film
The main release component to the cold tear film is silicon, which has good product stability along with a matte effect after thorough cooling.
Transfer first, cool down (below 55 degrees Celsius) and then gently peel from the lemon the film, otherwise one more a high-risk of tearing off the pattern.
If you are you looking for more on
Pleating Paper visit our own page.