White ink heat transfer holds a wide associated with uses, and its particular technology and effects are constantly being updated. What remains unchanged is once the heat transfer film is hot stamped for the substrate, the film must be taken off to complete the entire hot stamping process. However, some heat transfer films need to be hot-teared, while others need to be cold-teared. Many customers asks why it is vital? Which membrane is better?
Today, Let me take for you to definitely have an in-depth understanding of the magic heat dvd movie.
Hot-peel film
The main release component hot tear film is wax, which has poor ink absorption performance and small letters simple to fall off, but the surface becomes brighter after it is completely cooled.
After the stamping is transferred to your fabric via the ironing machine, it is torn off while it is hot, saving waiting times.
Tear it off within 9 seconds after turning on the press (ambient temperature 35°C), or tear it off when the film surface temperature is greater than 100°C.
If not peeled off in time, the cooling glue will stick to the clothes, creating the clothes and film to tear apart. There may be problems such as pattern residue.
Cold peel film
The main release component to the cold tear film is silicon, which has good product stability along with a matte effect after thorough cooling.
Transfer first, cool down (below 55 degrees Celsius) and then gently stem the film, otherwise can be certainly a high risk of tearing off the pattern.
Should you have any concerns with regards to wherever and how you can work with
Pleating Paper, you can email us from our own website.